Filter
Top Products
12-EN
Basic Operation
Example of Steps 2 and 3 Setting
(1) After entering corrections for the front (left and right)
speakers in STEP 15, the time difference is 1.5 ms for
both front-left and front-right speakers.
(2) After entering corrections for the left (front and rear)
speakers in STEP 15, the time difference becomes 3.0
ms* for the front left speaker and 1.5 ms for the left
rear speaker.
* Because the time difference was already set to 1.5 ms
for the front left speaker in STEP 1, the additional
correction in STEP 15 makes the time difference of the
front left speaker 3.0 ms.
1.5ms
1.5ms
∗
∗
1.5ms
1.5ms
3.0ms
1.5ms
1.5ms
MX
Rotary encoder
T.CORR
Tips
* Subwoofer speaker.
Delay (turn the rotary encoder) the audio signal to the front
(left and right) speakers to make the apparent position of the
subwoofer to be at the front. In doing this, the apparent
position between the front (left and right) speakers and
subwoofer will appear equal to the driver. After performing
above, you can change the positions of left and right speakers
by delaying the time .
Time Difference Table
0 0 26 2.6 52 5.2 78 7.8
1 0.1 27 2.7 53 5.3 79 7.9
2 0.2 28 2.8 54 5.4 80 8.0
3 0.3 29 2.9 55 5.5 81 8.1
4 0.4 30 3.0 56 5.6 82 8.2
5 0.5 31 3.1 57 5.7 83 8.3
6 0.6 32 3.2 58 5.8 84 8.4
7 0.7 33 3.3 59 5.9 85 8.5
8 0.8 34 3.4 60 6.0 86 8.6
9 0.9 35 3.5 61 6.1 87 8.7
10 1.0 36 3.6 62 6.2 88 8.8
11 1.1 37 3.7 63 6.3 89 8.9
12 1.2 38 3.8 64 6.4 90 9.0
13 1.3 39 3.9 65 6.5 91 9.1
14 1.4 40 4.0 66 6.6 92 9.2
15 1.5 41 4.1 67 6.7 93 9.3
16 1.6 42 4.2 68 6.8 94 9.4
17 1.7 43 4.3 69 6.9 95 9.5
18 1.8 44 4.4 70 7.0 96 9.6
19 1.9 45 4.5 71 7.1 97 9.7
20 2.0 46 4.6 72 7.2 98 9.8
21 2.1 47 4.7 73 7.3 99 9.9
22 2.2 48 4.8 74 7.4
23 2.3 49 4.9 75 7.5
24 2.4 50 5.0 76 7.6
25 2.5 51 5.1 77 7.7
Number
of
Steps
Time
Difference
(ms)
Number
of
Steps
Time
Difference
(ms)
Number
of
Steps
Number
of
Steps
Time
Difference
(ms)
Time
Difference
(ms)
SOURCE
BAND
Preset buttons (1 through 6)
MODE