Filter
Top Products
17-EN
Manual Storing of Station Presets
1 Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2 Press and hold any one of the Preset buttons
(1 through 6) that you want to store the station on for
at least 2 seconds. The selected station is stored.
The display shows the band, preset No. with a triangle
(9) and station frequency memorized.
3 Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select the
band desired and repeat the procedure.
A total of 18 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2 and AM).
NOTE
If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with the
new station.
Automatic Memory of Station Presets
1 Press the SOURCE button to select the radio mode.
2 Press the BAND button repeatedly until the desired
radio band is displayed.
3 Press and hold the A. ME button for at least 2 seconds.
The frequency on the display continues to change
while the automatic memory is in progress. The tuner
will automatically seek and store 6 strong stations in
the selected band. They will be stored into buttons 1 to
6 in order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in the preset location
No. 1.
NOTE
If no stations are stored, the tuner will return to the original
station you were listening to before the auto memory procedure
began.
Tuning to Preset Stations
1 Press the SOURCE button to select the radio mode.
2 Press the BAND button repeatedly until the desired
band is displayed.
3 Press the station Preset button that has your desired
radio station in memory.
The display shows the band, preset number with a
triangle and frequency of the station selected.