Alpine 68-04123Z09-A CD Player User Manual


 
33-EN
8 Band Button
Radio mode: BAND Button
Press this button and the band will change.
Changer mode: To switch the changer.
9 f UP Button
Radio mode: SEEK (UP) button
CD mode: Press this button to advance to the beginning
of the next track.
! 9 Button
Radio mode: Pressing this button will select, in
descending order, stations programmed into the radio's
presets as shown below.
6 5 ...1 6
CD Changer mode: DISC Select (DN) button
Press this button to select a disc in descending order.
MP3/WMA mode: Press the Folder Select (DN) button.
Press this button to select the folder.
MP3 compatible CD changer mode:
Folder Select (DN) / DISC Select (DN) button
Press this button to select a folder in descending order.
Press and hold this button to select a disc in descending
order.
" Mute Button
Press this button to lower the volume by 20 dB instantly.
Press this button again to cancel.
*
1
For the operation of external audio processor, refer to the Owner's
Manual of the external audio processor you purchased.
Operating the Audio Processor
1
Press A.PROC to select the mode.
Normal mode EQ mode (Equalizer Presets)Time
Correction mode (Recalling the Stored Time Correction)
Crossover mode (Recalling the Stored Crossover) Normal
mode
2
Press 8 or 9 to select the item.
EQ mode:
Select from factory’s EQ mode and USER'S 1 to 6.
Time Correction mode/Crossover mode:
Select from MEMORY 1 through 6.
Battery Replacement
Applicable battery: Use two “AAA” sized dry batteries or equivalent.
1
Opening the battery cover
Slide out the battery cover while firmly pressing in the
direction of the arrow.
2
Replacing the battery
Insert the batteries, observing the polarities as illustrated.
3
Closing the cover
Slide the cover as illustrated until a click is heard.
Point the remote control transmitter at the remote control
sensor.
Connectable to Steering Remote Control Interface Box
You can operate this unit from the vehicle’s control unit
when an Alpine Steering Remote Control Interface Box
(optional) (for sale in the near future) is connected.
For details, contact your Alpine dealer.
Remote control sensor