![](http://pdfasset.owneriq.net/8/ca/8cadee2e-e9b8-4b06-80c7-27567fff9986/8cadee2e-e9b8-4b06-80c7-27567fff9986-bgc.png)
W
A
R
N
I
N
G
&
D
I
S
C
L
A
I
M
E
R
11
Investigate the layout of your vehicle thoroughly before drilling
or cutting. Take care when you work near the gas tank, gas lines,
hydraulic lines, electrical components and electrical wiring. Do not use
the equipment unmounted. Attach this system securely to prevent
damage, particularly in the event of an accident or aggressive driving.
Do not mount the system so that wire connections are unprotected or
are subjected to pinching or damage from nearby objects. Before
connecting or disconnecting power connections at the system power
terminals, disconnect the +12V DC wire at the battery end. Confirm
that your source unit and other equipment are turned off while
connecting the input terminals. If you need to replace the power fuse,
replace it only with a fuse identical to the provided fuse. Using a fuse
of different type or rating may result in damage to the system, which is
not covered by the manufacturer's warranty. Do not install any product
where it may be subjected to excessive heat, moisture and dust or
where it may be repeatedly kicked, brushed or bumped. Make
absolutely sure that the terminals for the products are connected to the
proper inputs and outputs from the music source. Never run the wiring
on the outside of the vehicle or under it where it can be damaged by
road hazards or any moving parts of the vehicle. Use existing wire
channels, sills, panels and molding strips inside the vehicle to hide the
wiring for safety and a neat appearance.
DISCLAIMER
IMPORTANT: Never cut any metal that is an integral part of
the vehicle's safety or structural support system. If you are unsure, it is
best to have the product professionally installed by an Authorized
Alphasonik Dealer. Never sacrifice your safety for sound.