Filter
Top Products
FRS-1002-MD / FRS-1002-MD-LG-PA
Guide to installation and operation
16
The Card Setup Window
The Card Setup window allows the configuration of parameters affecting
the overall functionality of the card.
Save Settings Destination
The Save Settings Destination function allows the user to save up to
4 configurations of the FRS-1002 card’s parameters per channel. Once
you have configured the card to your liking in the Video Setup and Audio
Setup tabs of the Dashboard interface, select a name under which the
configuration will be saved, beside the Save Settings Destination
function, and hit the Save button. A dialog box will open and ask you to
confirm your decision Parameters can be saved as:
• All (applies the settings to User 1, 2, 3 and 4)
• User 1
• User 2
• User 3
• User 4
Settings can be saved by channel (1 or 2), or for both channels together
(All) in the Save Settings Source section.
Channel Settings
Once the parameters are saved to memory, the configuration becomes
available as a preset in the Channel 1 Settings or Channel 2 Settings
drop down menus.
Factory settings can be restored by selecting Default in the Channel 1
Settings or Channel 2 Settings drop down menus. The preset applies
to the selected channel only. The preset is applied immediately.
Following boot up of the card, the settings are automatically restored
from the channel selected settings.
Save settings
Recall & apply settings