Filter
Top Products
EFFECT Knob Settings 10
37
Pedal Stereo Delay
A Stereo Delay effect for which the feedback level is controlled by
the expression pedal.
Echo
An echo for which higher values indicate a wetter signal and lower
values indicate a drier signal.
Pedal Echo
An echo for which the wet/dry mix is controlled by the expression
pedal.
Hall Reverb
Simulates the effect of sound waves bouncing off of the walls of a
concert hall. Higher values indicate a wetter mix.
Pedal Hall Reverb
A Hall Reverb effect for which the wet/dry mix is controlled by
the expression pedal.
Room Reverb
Simulates the effect of sound waves bouncing off of the walls of a
room. Higher values indicate a wetter mix.
Pedal Room Reverb
A Room Reverb effect for which the wet/dry mix is controlled by
the expression pedal.
Reverse Reverb
Creates a backwards-playing reverb that you hear immediately
before you hear the original signal, instead of after it. Higher values
indicate a wetter mix.
Pedal Reverse Reverb
A Reverse Reverb effect with its wet/dry mix controlled by the
expression pedal.
Plate Reverb
Recreates the classic “plate reverb” sound achieved by using a
metal plate. Higher values indicate a wetter mix.
Pedal Plate Reverb
A Plate Reverb effect with its wet/dry mix controlled by the
expression pedal.
10 EFFECT Knob Settings
38
Chorus – same as in FX1.
Pedal Chorus – same as in FX1.
Flanger – same as in FX1.
Pedal-Controlled Flanger – same as in FX1.
Rotary Speaker – same as in FX1.
Pedal-Controlled Rotary Speaker – same as in FX1.
Pitch Transpose – same as in FX1.
Variable Pitch Transpose Up – same as in FX1.
Variable Pitch Transpose Down – same as in FX1.
Off
Indicates FX3 is off.
PARAM (Direct-Control Parameter for FX3)
This direct-control parameter works in a similar fashion as the one for FX1.
For Doubling, Ping Pong, Tape Delay and Stereo Delay, indicates
the length of the delay, up to one second for Tape Delay and up to
half a second for the others.
For Chorus, indicates the rate of the chorus.
For Flanger, indicates the rate of the flanger.
For Rotary Speaker, indicates the rate of the speaker rotation.
For Pedal Pitch Transpose Up and Down, indicates the amount of
pitch change in 1/4 semitones (from 1/4 semitone to more than 2
octaves). Wet/dry mix is fixed at 100% wet.
For all reverbs, higher values indicate a longer decay.
For fixed-interval Pitch Transpose, indicates the wet/dry mix from
0 (100% dry) to 10 (50% dry, 50% wet) to 20 (100% wet).