Filter
Top Products
Disc-to-Disc Backup Function
1. Insert the source disc into the reader CD-ROM [labeled as Reader], and
insert a blank disc into the writer CD-RW [labeled Writer]
2. Select [1.CopyDisc] and press the START button to begin the CD
backup.
3. The LCD will display the total disc length and the time elapsed while the
CD Twin is in process.
4. The CD-RW will automatically eject when the CD Twin has successfully
completed.
5. If you would like to make additional copies of the same disc, simply insert
another blank CD-RW into the Writer and press START again.
Pressing the CANCEL button will take you back to the Main Menu.
Track by Track Copy Function
1. Insert the source audio CD into the Reader CD-ROM drive and insert a
blank disc into the Writer CD-RW drive.
2. Select [2.Copy Track] from the main menu with the << or >> buttons
and press the START button.
3. Move the cursor under the track that you want to add to the compilation
CD by using the << or >> buttons. After selecting the track, a letter will
be displayed above the track number to denote that this specific track has
been chosen. Pressing the START button again while the cursor is
underneath a track number will cancel a selected track.
4. After you are finished selecting all of the tracks for your new compilation
CD, press the >> button until the cursor is under the [OK] option, all the
way to the right. Then simply press the START button and the CD Twin
will copy the selected tracks one by one.
5. After copying all of the tracks from the first CD, the Reader CD-ROM
drive will automatically eject. Insert the next audio CD, repeating steps 1
through 4, if you would like to add additional tracks to your compilation.
NOTE: After you have finished all of the track editing, you must use the [3.
Close Disc] function to make your new CD playable on any standard CD
player
7-51-0169-A