Filter
Top Products
11
En
Adjustments
To switch to monaural FM reception
Hold down SHIFT and press TUNER MODE on the remote
control so that "MONO" is displayed.
To cancel, repeat the above so that "STEREO" is displayed.
Tip:
When FM stereo reception is poor, switching to monaural
reduces noise.
To switch the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation
system is 9 kHz/step, change the tuning interval.
Hold down TUNER/BAND and press POWER on the main unit.
Tip:
When the AM tuning interval is changed, all preset stations
are cleared.
SOUND ADJUSTMENTS
Volume
Turn VOLUME (press VOLUME +,- on the remote
control).
Adjust from 0 (minimum) to 41 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 25 or higher, it is
automatically turned down to 24 the next time the unit is turned
on.
Tone control
Adjusts the bass, middle range and treble level.
1
Press TONE repeatedly to display "BAS" (bass),
"MID" (middle range) or "TRE" (treble).
2
Within 6 seconds, press f or g to adjust
the level.
Each level can be adjusted from "–5" to "+5".
If the sound becomes distorted, lower the level.
f,g
TONE
VOLUME
f,g
TONE
VOLUME +,-