Filter
Top Products
15
En
Side A
Tab for side A
6
Repeat step 5 to select the rest of the tracks for
side A.
The remaining recording time of side A is displayed. You
cannot select a track with a longer playing time.
7
Hold down SHIFT and press CD EDIT/CHECK on
the remote control to switch to side B and select
the tracks for the side.
8
Press wREC/REC PAUSE once to start recording.
The tape is rewound to the beginning of the side facing
out from the unit, "REC MUTE" flashes on the display
and the lead segment is played through for 10 seconds,
and recording starts.
When recording on the side facing out from the unit (side
A) finishes, recording on the opposite side (side B) starts.
On the remote control, hold down SHIFT and press REC/
REC PAUSE to start recording.
To stop recording
Press s. Recording and CD playback stop simultaneously.
To check the program
1 Before recording, hold down SHIFT and press
CD EDIT/CHECK on the remote control to select side A or
B.
2 Press f or g repeatedly. The track number and
program number are displayed in succession.
To change the program of each side
Hold down SHIFT and press CD EDIT/CHECK on the remote
control to select side A or B, and press s to clear the program
for the selected side. Then, select tracks again.
To clear the edit program
Press s twice.
To prevent accidental erasure
Break off the plastic tab of the cassette tape with a screwdriver
or other pointed tool. To record on the tape again, cover the
detection slot with adhesive tape.