Filter
Top Products
En
ENGLISH
9
SOUND PREPARATIONS
SOUND
AUDIO ADJUSTMENTS
VOLUME
Turn VOLUME on the main unit, or press VOL on the
remote control.
The volume level is displayed as a number from 0 to MAX (50).
The volume level is automatically set to 20 when the power is
turned off with the volume level set to 21 or more.
To change the left/right balance
Press MANUAL SELECT on the remote control. “L/R” is displayed
for 2 seconds. Press f DOWN or g UP on the remote control
within these 2 seconds.
• The DOLBY PRO LOGIC front speakers level is also changed.
(See page 18)
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press T-BASS.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
BBE SYSTEM
The BBE system enhances the clarity of high-frequency sound.
Press BBE.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
• Low frequency sound may be distorted when the T-BASS
system is used for a disc or tape in which low frequency sound
is originally emphasized. In this case, cancel the T-BASS
system.
• When playing back a tape recorded with BBE, it is
recommended that BBE be set to off to avoid distorted high
frequency sound.
GRAPHIC EQUALIZER
This unit provides the following three different equalization curves.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
CLASSIC: Enriched sound with heavy bass and fine treble
Press one of ROCK, POP or CLASSIC.
The selected equalization mode is displayed.
The display the current GEQ mode
Press GEQ once on the remote control. The current mode is
displayed for 4 seconds.
To cancel the selected mode
Press one of ROCK, POP or CLASSIC twice. “GEQ OFF” is
displayed.
To select with the remote control
Press GEQ repeatedly. The GEQ mode is displayed cyclically
as follows.
ROCK POP CLASSIC GEQ OFF
(cancel)
Using the headphones
Connect headphones to the PHONES jack with a standard stereo
plug (ø6.3 mm,
1
/4 inch).
No sound is output from the speakers while the headphones are
plugged in.
• When the headphones are plugged in, the DOLBY PRO LOGIC
is canceled.
Sound adjustment during recording
The output volume and tone (except BBE) of the speakers or
headphones are freely varied without affecting the recording.