Aiwa JAX-PK88 Stereo System User Manual


 
20
GB
To record a disc by specifying
track order
You can record only your favorite CD tracks
using Program Play. Between steps 3 and 4,
perform steps 2 to 6 of “Creating your own
program” (page 13).
Tip
For JAX-N88/N77/N66/N33/PK88/PK77/PK66, if you
select both sides recording and the tape reaches the end
of the front side part-way through a track, the entire track
is recorded again from the beginning of the reverse side.
You can record just the portions you like from a
CD, tape or radio program on a tape.
You can also record from connected
components (see “Hooking up optional
components” on page 27).
Use buttons on the unit for the operation.
1 Load a recordable tape into deck B,
then press TAPE A/B repeatedly to
select deck B.
2 (JAX-N88/N77/N66/N33/PK88/PK77/
PK66 only)
Press PLAY MODE repeatedly to select
g” to record on one side. Select
j” (or “RELAY”) to record on both
sides.
When you want to record from the reverse
side, press hH twice or until the TAPE
B reverse side indicator lights up. Then
press x.
3 Press one of the following buttons to
select the desired source to record.
CD: To record from this system’s CD
player.
TAPE A/B: To record from this system’s
tape deck A.
TUNER/BAND: To record from this
system’s tuner.
VIDEO/MD: To record from the
connected VCR or MD deck to VIDEO/
MD IN jacks.
4 Press REC PAUSE/START.
Deck B stands by for recording.
“REC” flashes.
5 Press REC PAUSE/START, then start
playing the desired source to record.
Recording starts.
Recording on a tape
manually
— Manual Recording