Aiwa JAX-PK66 Stereo System User Manual


 
Getting Started
7
GB
3 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Plug type A
Plug type B
Plug type C
Note
Keep the antennas away from the speaker cords.
4 For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Refer to the print on your system’s
VOLTAGE SELECTOR for available
settings.
5 Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
Inserting two R6 (size AA)
batteries into the remote
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.
Extend the FM lead antenna horizontally
AM loop antenna
Extend the FM lead antenna horizontally
AM loop antenna
AM loop antenna
North American model:
Connect white side.
Other models:
Connect brown side.
Extend the FM lead
antenna horizontally
continued