Filter
Top Products
TAPE/POWER/
6STANDBY
RADIO/BAND
QSOUND
T-BASS
r, t
CD
VOLUME N, M
REPEAT/SLEEP
3-MODE EQUALIZER
s STOP/MEMORY
C
PAUSE
STOP/EJECT
FF REW
PLAY
REC
DISPLAY
EQ
VOL i, k
r, t
Use Type I (normal) tapes only.
INSERTING A TAPE
Press Z STOP/EJECT to open the cassette
holder and insert a tape with the exposed side
up and the side to be played facing out.
Push the cassette holder to close.
PLAYING A TAPE
Press x PLAY while the power is off.
The power is turned on and play of the inserted tape
begins.
The volume level is displayed during tape operation.
Z STOP/EJECT – Stops play. The power will be
automatically turned off.
a PAUSE – Pauses play. To resume play, press
again.
f FF/ g REW – Fast forwards/ rewinds. To stop
the winding, press Z.
TAPE OPERATION
C
8 ENGLISH
RECORDING
Note that recording is done on only one side of the
tape.
1 Insert a tape with the side to be recorded
facing out.
2 Get ready to record from the source.
To record from a CD, press CD and load the disc.
To record from a radio broadcast, press RADIO/
BAND and tune to a station.
3 Press w REC to start recording.
x PLAY is pressed simultaneously.
When the selected function is CD, CD play and
recording starts simultaneously.
To record only the selected tracks of a CD
1 Follow steps 1 to 4 of PROGRAMMED PLAY on
page 7 to program tracks.
2 Press w REC.
To stop recording, press Z STOP/EJECT. To stop
CD play, press s STOP/MEMORY.
To pause recording, press a PAUSE. To resume
recording, press again.
To erase recording, press w REC while the power is
off.
After recording, press TAPE/POWER/6STANDBY to
turn the power off.
To prevent accidental erasure
Break off the plastic tabs on the cassette tape with a
screwdriver or other pointed tool after recording.
To record on the tape again
Cover the tab openings with adhesive tape, etc.
Tab for side A
Side A
(CSD-TD66 only)