Aiwa BMZ-K2 Stereo System User Manual


 
3
En
TABLE OF CONTENTS
PREPARATIONS ................................... 4
PARTS AND CONTROLS ......................... 5
ADJUSTMENTS BEFORE OPERATION .......... 8
SOUND ADJUSTMENTS.......................... 9
CD OPERATIONS ................................ 10
MP3-CD OPERATIONS ......................... 13
TUNER OPERATIONS ........................... 15
TIMER OPERATIONS ........................... 16
CONNECTING A PERSONAL COMPUTER .... 18
REFERENCE ..................................... 21
Notes on discs
Playable discs on this unit are Audio CDs (CDs), CD-R/
CD-RW with audio data (CD-R/RW) and CD-R/CD-RW with
MP3 files (MP3-CDs).
Discs recorded on CD-R/RW drives may not be played back
because of scratches, dirt., recording condition or the drive's
characteristics.
CD-R/RW discs which are not finalized at the end of
recording cannot be played back.
Do not attach adhesive label, etc. to either side of a CD-R/
RW disc, as doing so may cause malfunction.
Do not load an unrecorded CD-R/RW disc. The disc may be
damaged.
Do not insert 8-cm (3-inch) discs. Those discs cannot be
played on this unit. Moreover, if you insert the discs of that
size forcibly, you may not be able to eject it.
Discs with non-standard shapes (e.g., heart, square, star)
cannot be played on this unit. Attempting to do so may
damage the unit. Do not use such discs.
DVD, SACD, CD-ROM and VCD cannot be played on this
unit.
Music discs encoded with copyright protection
technologies
This product is designed to playback discs that conform to
the Compact Disc (CD) standard. Recently, various music
discs encoded with copyright protection technologies are
marketed by some record companies. Please be aware that
among those discs, there are some that do not conform to the
CD standard and may not be playable by this product.
If you have any questions or problems concerning your stereo
system, please consult your nearest Aiwa dealer.
On safety
The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet, even if
the unit itself has been turned off.
Unplug the system from the wall outlet (mains) if it is not to be
used for an extended period of time. To disconnect the cord
(mains lead), pull it out by the plug. Never pull the cord itself.
Should any solid object or liquid fall into the component,
unplug the stereo system and have the component checked
by qualified personnel before operating it any further.
The AC power cord must be changed only at a qualified service
shop.
On placement
•Place the unit in a location with adequate ventilation to prevent
heat build-up the unit.
Do not place the unit in an inclined position.
•Do not place the unit in locations where it is;
- Extremely hot or cold
- Dusty or dirty
-Very humid
- Vibrating
- Subject to direct sunlight.
On heat buildup
Although the unit heats up during operation, this is not
malfunction.
•Place the unit in a location with adequate ventilation to prevent
heat build-up in the unit.
If you continuously use this unit at a large volume, the cabinet
temperature of the top, side and bottom rises considerable. To
avoid burning yourself, do not touch the cabinet.
On operation
If the system is brought directly from a cold to a warm location,
or is placed in a very damp room, moisture may condense
on the lens inside the CD player. Should this occur, the system
will not operate properly. Remove the CD and leave the system
turned on for about an hour until the moisture evaporates.
•When you move the system, take out any discs.