Filter
Top Products
5
En
Main unit: rear
1 LINE OUT jacks
Analog sound signals for CD or radio can be output
through these jacks. Use a cable with RCA phono plugs
to connect audio equipment.
Connect the red plug to the R jack, and the white plug to
the L jack.
Signals input through the AUX/VIDEO IN jacks are not
output from the LINE OUT jacks.
1
3
2
6
4
5
PARTS AND CONTROLS
AUX/VIDEO IN jacks
Accept analog sound signals from external equipment.
Connect external equipment using an optional connecting
cable with RCA phono plugs (red plug to the R jack, white
plug to the L jack). Refer also to the operating instructions
for your equipment.
To switch function to external input, press FUNCTION
repeatedly to select the AUX (VIDEO or TV) function.
Tip:
To change a source name in the display, hold down g
and press POWER while the power is on.
AUX → VIDEO → TV
2 DIGITAL OUT (OPTICAL) jack
CD digital sound signals can be output through this jack.
Use an optical cable to connect digital audio equipment.
Remove the dust cap from the DIGITAL OUT (OPTICAL)
jack. Then connect an optical cable plug to the DIGITAL
OUT (OPTICAL) jack.
When you record the sound signals of this unit with digital
audio equipment (MD recorder, CD recorder, etc.)
connected to this jack, the beginning of the first track
may not be recorded.
3 AM LOOP jack and FM 75 Ω terminals
Plug in the supplied AM and FM antennas.
4 SUPER WOOFER3 jack
Connect an optional powered sub woofer with a built-in
amplifier to this jack.
5 SPEAKERS3 terminals
Connect the supplied speakers using the supplied
speaker cords.
6 AC power cord