Filter
Top Products
8
En
ADJUSTMENTS BEFORE OPERATIONS
Power
Turning the unit on
Press POWER 6STANDBY/ON (POWER on the remote
control).
Or press TAPE, TUNER/BAND, VIDEO/AUX or CD, the
playback will start automatically if a disc or tape is inserted.
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
Volume
Turn VOLUME (Press VOL N,M on the remote
control).
Adjust from 0 (minimum) to 30 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 17 or more, it is
automatically turned down to 16 the next time the unit is turned
on.
DEMO
If the clock has not been set, a DEMO appears on the display
when the unit is turned off. There are two kinds of DEMO:
"Illumination demo" and "Game demo". You can enjoy both
on the unit.
To deactivate and activate the DEMO
Press DEMO.
To switch between "Illumination demo" and "Game
demo"
Hold down DEMO and press POWER
when the unit is turned
off.
To play the Game demo
Press d so that three numbers start to run and then press
s three times to stop the numbers.
If the three numbers are equal, you win points. If not, you lose
them.
Tip:
To change the winning probability, press f or g so
that the CD tray number indicator changes between 1 (lowest)
and 3 (highest).
• If the DEMO is activated when the unit is turned on, the
operation buttons such as s, for g cannot be
used for TAPE, TUNER/BAND or CD.
AUDIO OPERATION CONTROL PANEL
Reveals and covers the operation buttons.
To open and close the control panel
Press PANEL OPEN/CLOSE (SHIFT+PANEL OPEN/CLOSE on
the remote control).
To select AUTO or MANUAL mode
Press PANEL AUTO/MANU repeatedly to select "AUTO" or
"MANUAL".
AUTO mode
- The control panel is opened or closed automatically.
e.g.) It is closed when the cassette holder is opened and it
is opened when the cassette tape is inserted and the holder
is closed.
MANUAL mode
- The control panel is opened or closed as you operate with
PANEL OPEN/CLOSE.
Tip:
The control panel is opened every time the unit is turned off
and the DEMO appears on the display.
To prevent this, set the clock so that the clock is displayed
when the unit is turned off, and the panel stays closed.
To display the current mode
Press PANEL AUTO/MANU once.
The mode will be displayed for 4 seconds.