Filter
Top Products
Preparation
● Use Type I (normal) tapes only.
● Set the tape to the point where recording will start.
1 Insert the tape to be recorded on into deck 1.
Insert the tape with the side to be recorded on first facing out
from the unit,
2 Press function (CD, TAPE, TUNER or VIDEO/AUX)
and prepare the source to be recorded.
To record from a CD, press CD and load the disc(s)
3
TQecord from a tape, press TAPE. Then insert the original
tape into deck 2 and play it.
To record
lfrom a radio broadcast, press TUNER/BAND and
tune in to a station.
lkrecord from a connected source, press VIDEO/AUX.
press O to start recording.
- is depressed simultaneously,
When recording from a connected source, start playback of
the :source.
When the selected function is CD, playback and recording
start simultaneously.
To stolp recording, press W= on deck 1.
To paulse recording, press II on deck 1.To resume recording,
press it again.
To record selected tracks of the CD
Before pressing
●, program the tracks (see page 9).
To start recording precisely (except when recording from
a CD)
Before pressing
● at step 3 above, press II on deck 1.Then,
press
● .The deck enters recording pause mode. To restart
recording, press 1I again.
To record part of the CD
When
● is pressed, recording always starts from the first track,
To start in the middle of a track, play the CD first and press II for
CD at the point to start recording from, Then, press O .The pause
mode for CD is released automatically and recording starts.
f
\
About cassette tapes
● To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
Side A
To record on the tape again, cover the tab openings with
adhesive tape, etc.
● 120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
● Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break orjam in the mechanism,
m
Do not press the buttons on deck 2 during recording.
Sound adjustment during recording
To erase a recording
The output vcllume and tone of the speakers or headphones are
1 Insert the tape to be erased into deck 1 and press TAPE.
freely varied without affecting the recording.
2 Set the tape to the point where the erasure is to be started.
3 Press
● to start the erasure.
ENGLISH 11