Filter
Top Products
ENGLISH 7
0-9, +10
MODE
EQ
a PAUSE
VOL i, k
s STOP
BAND
r, t
c PLAY
PRESETTING STATIONS
You can preset up to 15 stations in each band.
1 Select a station.
2 Press *a PAUSE/SET once so that “M” is
displayed to store the station.
A station is assigned a preset number, beginning
from 1 in consecutive order for each band.
* or a PAUSE on the remote control
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 15
preset stations have already been stored for a
band.
To listen to preset stations
Select a band then press d PLAY/DIR/PRESET
(c PLAY/PRESET) repeatedly.
c PLAY on the remote control is also available.
To select a preset number directly with the
remote control
Press the numbered buttons 0-9 and +10.
Example:
To select number 15, press +10 and 5.
To select number 10, press +10 and 0.
To clear a preset station
Select the preset number first. Press s, and press a
within 4 seconds.
The higher numbers in the band are decreased by one.
En
SOUND ADJUSTMENT
Volume or tone adjustment does not affect
recording.
VOL (volume)
Press VOL UP or DOWN. The volume
level is displayed as a number from 0 to 25.
• The volume level is automatically set to 14 if the
power is turned off when the volume level is set
to 15 or more.
*3-MODE EQ (equalizer)
Press 3-MODE EQ repeatedly until the desired
mode is displayed.
The equalizer mode changes to R (Rock), P (Pop),
J (Jazz) or no equalization, cyclically.
Rock - Emphasizes the high and low range of
music.
Pop - Emphasizes voice and midrange of music.
Jazz - Emphasizes the low range of music.
* or EQ on the remote control
T-BASS system
The T-BASS system enhances the realism of low-
frequency sound.
Press T-BASS to turn it on or off.
QSOUND system
This system provides a rich, three dimensional
sound area for stereo sources.
You can enjoy more enhanced sound.
Press QSOUND and the QSOUND indicator lights
up.
• At higher volumes, turning QSOUND on may
cause sound distortion. In this case, make the
volume down.
Preset number
Frequency