EnEn
EnEn
En
ENGLISH
10
EE
EE
E
(Españo(Españo
(Españo(Españo
(Españo
FF
FF
F
(França (França
(França (França
(França
SOUND
When the music source is monaural
The DSP system may not work effectively.
To cancel the selected mode
Press the DSP button to display the DSP mode name, and press
the button again within 4 seconds. “DSP OFF” appears on the
display. Even if canceling the selected DSP mode, the matching
or selected GEQ mode still remains.
To select with the remote control
1 Press the DSP button.
2 Within 4 seconds, press the UP or DOWN button repeatedly
until the desired DSP mode is displayed.
30 preset modes can be selected.
To change the mode rapidly, hold down the UP or DOWN
button.
To adjust the volume and balance of the surround
speakers
Press the MANUAL SELECT button on the remote control three
times to display “SUR 0dB” while the DSP system is turned on.
Then press the N(UP) or M(DOWN) button repeatedly or
turn the MULTI JOG within four seconds.
NOTE
The DSP surround system is automatically canceled and cannot
be turned on:
- When the headphones are plugged in
- When the input signal is 96 kHz
Selected mode
DISCO 1 THEATER CHURCH
DISCO 2 ARENA 2 CAR
DISCO 3 ARENA 1 PARTY 1
LIVE 1 GAME 2 PARTY 2
LIVE 2 GAME 1 CLASSIC
LIVE 3 MOVIE 2 TV SPORT
HALL 1 MOVIE 1 MUSEUM
HALL 2 JAZZ 2 CONCERT
HALL 3 JAZZ 1 BALLADE 1
STADIUM 1 STADIUM 2 BALLADE 2
DSP SURROUND
The DSP (Digital Signal Processor) surround circuits can recreate
the effect of sounds reflected from walls or ceilings, to obtain the
sound presence of real environments. The unit provides 30 DSP
preset modes. Some of them are accompanied with the matching
GEQ preset mode, and you can also select or turn off the GEQ
to suit your preference.
Press the DSP button, and turn the MULTI JOG or
press the N or M button repeatedly until the
desired DSP mode is displayed.
The selected mode name is displayed for four seconds, and the
DSP indicator lights up. When the selected DSP mode is
accompanied with the matching GEQ mode, the GEQ indicator
lights up as well.