Filter
Top Products
2
Making holes
Slanted installation
Be sure to set the
mounting angle
setting levers to the
45° position.
Suspended installation
When installing the unit in the trunk below the
package tray, observe the following.
• Select the mounting location carefully so that
the unit does not hinder the movement of the
torsion bars of the deck lid.
INSTALLATIONS
1
Construction
For details on abc..., see page 3.
Caution
Before drilling the holes, make sure that there is
nothing on the other side of the mounting surface.
3
Completion
7
ENGLISH
15˚
15˚
45˚
Tapping screws are not supplied.
Note on the brackets a
To save installation space, you can place the
brackets a inside out, as illustrated below.
The position of the lever.
The effective angle of the unit.