Filter
Top Products
system configurations
The ie series subwoofers are designed to integrate with a wide variety of full range speakers. A typical
installation consists of a factory stereo system driving an external amplifier powering the ie series
subwoofer. A more advanced system utilizes separate midrange and hi frequency speakers and multi-
channel amplification, such as an a/d/s/ PH30 amplifier powering 346is speakers front and rear along
with an ie series subwoofer.
factory upgrade
advanced system
speaker connections
The ie series subwoofers have a terminal cup mounted on one end of the speaker enclosure. One
terminal is labeled + (red) and the other one is – (black). Connect the positive (+) wire of the amplifier
to the positive (+) wire of the speaker enclosure. Then connect the negative (-) wire of the amplifier to
the negative (-) wire of the speaker enclosure.
maintenance
Normal maintenance of the subwoofer consists of keeping the unit clean and dust-free. Use a soft
cloth or brush to remove dust without scratching or marring the finish. Do not use strong cleaners or
solvents of any kind. Avoid spray cleaners or waxes, they can produce spotty glossy areas.
troubleshooting
No sound Check the speaker cables connected to the inputs of the
subwoofer.
Buzzes and rattles Locate the source of the noise and secure it. Place carpet,
or felt under the subwoofer then securely mount it down.
43