a/d/s/ HT800IW Speaker User Manual


 
removing the grille
Should it be necessary to remove the grille, insert an awl or other pointed tool into a grille hole near the
corner. Gently lift the grille out of the speaker frame. Repeat this procedure at each corner of the grille,
gradually lifting the corners of the grille until it is removed. Be careful not to allow anything to touch the
woofer cones or tweeter domes while the grille is removed.
custom painting
Paint the speaker frame and grill before mounting to the wall; paint grill and frame separately.
Before painting, mask the recessed area of the speaker to completely protect the speaker drivers.
After painting the grill, gently blow through its perforated holes to prevent paint clogging.
operation
checking the system
Listen carefully to each speaker. If you hear buzzing or rattling noises, remove the speaker and check for
a speaker wire or other objects touching the speaker assembly. When you are satisfied with the
installation press the grills into place.
6