Filter
Top Products
specifications
Model C10ps C12ps HT10ps HT12ps
Driver size 10” 12” 10” 12”
Cabinet design Sealed Sealed Single-reflex bandpass
Amplifier power 200W 500W 500W 500W
Frequency response 25–250 Hz 20–250 Hz 20–180 Hz 15–180 Hz
Maximum output (@ 1M) 107 dB 110 dB 110 dB 112 dB
Weight 39 lbs (17.6 Kg) 47 lbs (21.5 Kg) 67 lbs (19 Kg) 81 lbs (24.3 Kg)
common specifications
Distortion: Less than 1%
Low Pass Crossover Frequency: 40Hz to 180Hz, variable
High Pass Crossover Frequency: 80Hz, fixed
Low Pass Crossover Slope: 12dB per octave
High Pass Crossover Slope: 12dB per octave
Bass Boost or Cut +/- 6dB variable, centered @ 35 Hz
Inputs Stereo preamp/line level
Mono LFE/line level
Stereo speaker level
Outputs Stereo preamp/line level unity gain through-pass
Stereo preamp/line level high pass
Mono LFE/line level
Subwoofer Level: Continuously variable
Preamp Input Impedance 50K Ohms
Output Impedance 20K Ohms
Line Voltage/type Switchable for 115V/60 cycle or 230V/50 cycle
Line Current 2.6 amp @ 300 W (C10ps 4.3 amp @ 150 W)
Specifications subject to change without notice.
18