Acoustic Research ARW200 Headphones User Manual


 
ad d I t I o n a l In f o r m a t I o n
7
st o r I n G t h e he a d p h o n e s
The ARW200 headphones come with a travel pouch for convenient storage on
the go.
To store the headphones:
1. Unzip the travel pouch.
2. Fold the earpieces at and push them toward the top of the headband. The
bottom of the headband should cross.
3. Bundle up the cord and place it in the center of the folded headphones.
4. Place the headphones and cord in the travel pouch, and zip the pouch
closed.
tr o U b l e s h o o t I n G
The following troubleshooting guide takes you through two of the more
common problems associated with the installation and/or operation of the USB
headphones. If the problem you are experiencing persists, please call toll-free
1-800-732-6866 or visit www.araccessories.com.
ISSUE: No sound
Check that your PC is turned on, and make sure that the PC’s mute function
has not been activated.
Conrm that the headphones’ USB connector is properly connected to a USB
port on your PC.
ISSUE: Interrupted sound
Check that there is a secure connection between the headphones’ USB
connector and a USB port on your PC.
Remove the headphones’ USB connector from the USB port it is currently
connected to and connect it to a different USB port on your PC.
Listen Safely!
Enjoy your earphones at a safe volume. Avoid or limit the amount of time you
listen at higher volumes—permanent hearing loss may occur if the earphones
are used at too high a volume. If you experience a ringing in your ears, or
your own voice and other sounds seem mufed, stop using the earphones and
consult a hearing professional.