Filter
Top Products
32
ON
OFF
Managing Discs
1.Switch to a certain data source and press [ENTER], the system will switch
to play the data source you select.
2. a certain data source, if you don't press [ENTER], the system
will also switch to play the data source you select automatically after
10 seconds.
3.If the data source you select is the current one, the system will exit
the switching interface in 10 seconds.
4.If there is no disc in the play position when you plug a USB Device or a
memory card into the player, the system will switch to play the new-
input data source automatically. If you want to read from a disc in this
state, you should select a disc NO. that is not empty and press [ENTER].
5.If there is a disc in the play position when you play a USB Device or
memory card, the system will switch to read the disc immediately after
you pull out the USB Device or card.
Note If you insert a USB Disc or a memory card when the player is playing
MIDI discs even if you don't switch the data source, two automatic
operation processes will follow:
1.If there is no MIDI song in the program list, the system will switch to
play the new-input data source automatically after it finishes the
current song.
2.If there are some MIDI songs in the program list, the system will switch
to play the new-input data source automatically after it finishes
playing the songs you programmed before inserting the USB Device or
card. In addition, the system will record the song numbers that you
programmed after inserting the USB Device or card. When you return to the
state of “READ DISC” by pressing [USB/CARD] after the system finishes
playing the files in USB Disc or card, the system will play the remaining
MIDI songs in the program list.
If there is no card or USB available, when you press [USB/CARD ], the
screen will display “USB/CARD NOT FOUND”.
If there are several different file formats such as MP3, JPEG and MP4 in
the same USB disc or card, three icons will appear on the bottom right
corner on the TV screen. You can play the different files by pressing the
arrow keys to move the cursor to the corresponding icons.
Switch to
Press [TIME] to start the function of "Powering off Timing",
the VFD displays . The time value will add 15 minutes each you press
[TIME], the VFD displays the time value, and it will disappear
in 5 seconds. If you press the button of [TIME] when the time value is not
displayed on the VFD, you can see the remaining time. If you press
"Powering off Timing",the VFD displays .
time
12. Powering off Timing
K Commands(with PS/2 keyboard attached)13. eyboard
F1: Editing information F2: Disc information F5: Selecting a disc by disc NO.
F8: Play F9: Stop ENTER: ENTER
Page up: DISC+ Page down: DISC- ESC: RETURN
Number button: Digit function DELETE: DELETE Letter button: Letter function