Page 10
Cleaning the Sound Tube
Be sure that the tube and dome are kept free of
debris and earwax. Even a small amount of vapor
and tiny grains of debris may stop the ow of sound.
• Remove sound tube (See pages 8-9)
• Use a soft dry cloth or tissue to clean the outside
of the sound tube and dome. Insert the cleaning
wire at either end.
• Push the wire all the way into the sound tube
until it comes out the other side
• Pull the wire through and retain for future use.
• Reattach the sound tube by snapping it rmly
onto the brass nozzle on the body of the
amplier.
Do not use water to clean the tube as this may cause vapor or droplet
blockage.
Top