Filter
Top Products
10
Zone operation
Each zone (except Zone 1) has an input switch. is switch allows the
input for the zone to be taken from either the corresponding zone input
or the zone 1 input. is allows for the input to zone 1 to be sent to
multiple loudspeaker pairs. Switch all input switches to Zone 1 if you
require the same stereo source to be reproduced in all zones. Note that
if the input switch is set to the other position, then the zone will require
its own stereo source (preamplier or stereo music system). Examples of
dierent setups are shown below:
L
R
AUDIO IN
Z1 Z2
L
R
AUDIO IN
Z5
Z6
Z1
_
_
+ +
R L
Z2
_ _
+ +
R L
L
R
AUDIO IN
Z3
Z4
Arcam C31 Preamplifier
Arcam CD37 CD Player
Arcam T32 Tuner
ZONE 1 ZONE 4
Arcam Solo Mini System
MZ12 Amplifier
Independant zones
Z5
_ _
+ +
R L
Z6
_ _
+ +
R L
Z3
_ _
+ +
R L
Z4
_ _
+ +
R L
MZ amplifier with two independant zones
L
R
AUDIO IN
Z1 Z2
L
R
AUDIO IN
Z5
Z6
Z1
_
_
+ +
R L
Z2
_ _
+ +
R L
L
R
AUDIO IN
Z3
Z4
Arcam C31 Preamplifier
Arcam CD37 CD Player
Arcam T32 Tuner
ZONE 1 ZONE 4
MZ12 Amplifier
Set Zone 4 input to Z1
Zone 1 system is heard in both zones
Z5
_ _
+ +
R L
Z6
_ _
+ +
R L
Z3
_ _
+ +
R L
Z4
_ _
+ +
R L
MZ amplifier with one source feeding two zones
Operation
Each channel of each zone has a trim control. is recessed control
allows each speaker’s volume to be adjusted using a small at blade or
cross-head screwdriver and is ideal for compensating for dierences
in sensitivity between dierent speaker types. For everyday volume
adjustment, it is recommended to connect source equipment with an
adjustable output such as the Arcam C31 preamplier or Solo Music
system.