Filter
Top Products
A65/A75/P75
10
Technical specifi cations
A65 A75 P75
Output power (20Hz–20kHz)
8Ω, continuous 40W 50W 50W
8Ω, 1 channel, 1KHz 50W 60W 60W
4Ω, 1 channel, 1KHz 80W 90W 90W
Harmonic Distortion
Rated output into 8Ω at 1kHz 0.01% 0.01% 0.005%
Peak current rating ±15A ±15A ±15A
L/R Crosstalk –68dB –68dB –90dB
Input sensitivity for rated power output 250mV 260mV 540mV
Frequency response ± 0.25dB 20Hz–20kHz 20Hz–20kHz 20Hz–20kHz
Inputs
Line inputs:
Noise (CCIR) ref. rated power –100dB –100dB –110dB
Input impedance 12kΩ 12kΩ 100kΩ
AV/DVD (Processor Mode):
Input impedance N/A 12kΩ N/A
Input sensitivity N/A 540mV N/A
Power Amplifi er:
Input impedance N/A N/A 100kΩ
Phono input:
Noise (CCIR) ref. rated power –75dB –76dB N/A
Input sensitivity 1.9mV 2.0mV N/A
Input impedance 47kΩ 47kΩ N/A
Overload margin 30dB 30dB N/A
Outputs
Pre-amplifi er output:
Nominal output level 510mV 540mV N/A
Maximum output level 8V 8V N/A
Output impedance <3Ω <3Ω N/A
Tape output:
Output impedance <3Ω <3Ω N/A
Headphones:
Maximum output level into 600Ω 40mW 40mW 40mW
Output impedance 80Ω 80Ω 80Ω
Mains voltage 230V ± 10% 230V ± 10% 230V ± 10%
115V ± 10% 115V ± 10% 115V ± 10%
Power consumption (max) 370VA 400VA 400VA
Physical
Dimensions W x D x H 430 x 330 x 85mm 430 x 330 x 85mm 430 x 330 x 85mm
Weight net 5.4kg 5.6kg 5.6kg
Weight packed 6.9kg 7.1kg 7.1kg
Supplied accessories Mains lead Mains lead Mains lead
CR-389 remote CR-389 remote
2 x AAA batteries 2 x AAA batteries
E&OE
Continual improvement policy
Arcam has a policy of continual improvement for its products.
This means that designs and specifi cations are subject to
change without notice.
NOTE: All specifi cation values are typical unless otherwise
stated.