Filter
Top Products
12
(2) Connection Setting
RS-232C --- Check the radio button and choose
COM port number for serial
connection.
NETWORK --- Check the radio button for network
connection. Please enter the IP
address of projector and port
number. You can choose the
projector from the discovered list if
the discovery function is already run.
The default port number of PL75X,
PL80X, X70, X75, X75C, X75K, X80,
X80C and X80K is 23. The default of
CL33X, CL35X, CL67N, CL69N,
CL72X, CL73W, CL73X, CL86X,
NE7, PL93X, PL96X, WX36, WX36i,
X21i, X26i, X30N, X31, X31i, X35N,
X35NK, X36, X36i, X46, X46i, X56,
X62w, X64w, X90, X90K, X90w, X95,
X95K, X95i and X95iK is 23 or
9715. Authentication and Password
is available for CL33X, CL35X,
CL67N, CL69N, CL72X, CL73W,
CL73X, CL86X, NE7, PL90X, PL93X,
PL95X, PL92X, PL96X, WX36,
WX36i, X21i, X26i, X30N, X31, X31i,
X35N, X35NK, X36, X36i, X46, X46i,
X56, X62w, X64w, X90, X90K, X90w,
X95, X95K, X95i and X95iK.
Projector List --- The list shows the projectors that you register.
[Insert] : Insert new projector into the projector list.
[Update] : Update selected projector setting and save changes.
[Delete] : Delete selected projector from the projector list.
When you manage multiple projectors at the same time, you need to pick one
projector and select a checkbox in order to be a delegate for displaying CH selection
and volume level.
Please rarify IP settings to make sure the PJCtrl is able to communicate with the projector by ping
command.
(3) Configure Buttons
Click the Show Buttons TAB to configure which bottoms
you want to use. Check the checkbox that you want to
show as the button. The configuration window can be
displayed if you make a right click on the task tray icon.
Icon Size:
Also you can choose icon size from 24, 36 or 48 dots.
Always on top:
“Always on top” option allows that the PJCtrl application
always show up foreground.
© 3M 2012. All Rights Reserved.