How to sync an iPhone 4S with the Xtreme Mac Air Tango?

Asked by Anthony on 08/31/2014 2  Answers

ManualsOnline posted an answer 9 years, 7 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
0 Simple Instructions (If this doesn't work, go to the "Manual Setup Instructions", below): 1) Hookup is as simple as hooking the device up by USB 2) Boot up the Tango 3) Quick tap on the setup button next to the USB... it asks you on your device to share the WiFi settings... allow and about 30 seconds later it's on your network. Manual Setup Instructions: 1) Hook up the USB and boot up the Tango 2) Hold the setup button next to the USB input for about 5 seconds till it starts flashing 3) Search for WiFi networks (on your device or computer) and you'll see 'Tango XXXXX' ... connect to that network 4) Open your browser to http://192.168.1.12 (the http server address for the Tango). 5) You should see an XtremeMac browser window with the Status info. of your Tango Air (i.e.: MAC Address; Connection Status; Signal Strength; Firmware Date; Product Firmware Version) 6) On the gray left-hand column, click on the "Wireless Setup" link 7) Select your WiFi router on the pulldown menu 8) Type in your password in the password field 9) Click on the "Apply" button below. 10) After a minute or two, your Tango Air will connect to your WiFi router and you're in business. 11) Make sure to reset your device or computer (the one you used to access the Tango Air, back to your WiFi router as well. From there setup is self explanatory. If not, look at the manual. 5) Click on "Wireless Setup"
Was this answer helpful?
0 Oops. Please forget the last two bottom lines of the instructions...just forgot to erase them :-)
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.