Filter
Top Products
8
1
POWER
switch
Press this switch to the
ON
position to turn on the
power to the subwoofer. When the power of the
subwoofer is on, the power indicator (4) on the rear
panel light up in green. Press this switch again to set it
to
OFF
position to turn off the power of the subwoofer.
2
OUTPUT (TO SPEAKERS) terminals
Can be used for connecting to the front speakers.
Signals from the
INPUT 1
terminals are sent to these
terminals.
(Refer to “CONNECTIONS” for details.)
3
VOLUME control
Adjusts the volume level. Turn the control clockwise to
increase the volume, and counterclockwise to decrease
the volume.
4
Power indicator
Light up in green when the power switch (1) is turned
on; turns off when the power switch is turned off.
5
HIGH CUT switch
Selects the high frequency cut off point. Normally, it is
set to
LOW
, however, you may set to
HIGH
if
necessary. (Refer to page 9)
6
INPUT 2 terminals
Used to input line level signals from the amplifier.
(Refer to “CONNECTIONS” for details.)
7
INPUT 1 (FROM AMPLIFIER) terminals
Used to connect the subwoofer with the speaker
terminals of the amplifier.
(Refer to “CONNECTIONS” for details.)
CONTROLS AND THEIR FUNCTIONS
POWER
VOLUME
OUTPUT
TO SPEAKER S
INPUT
2
/MONO
HIGH LOW
HIGH
CUT
INPUT 1
FROM AMPLIFIER
ON
OFF
/MONO
HIGH LOW
HIGH
CUT
INPUT 1
FROM AMPLIFIER
INPUT
2
OUTPUT
TO SPEAKERS
1
34
7
6
5
2
VOLUME
Subwoofer rear panel