®
Ultra Low Noise
Distribution Amplifiers
HDA-100
15 dB Gain
54-1000 MHz
-2 dB 2-Way Bi-pass
HDA-200
24 dB Gain
54-1000 MHz
Variable gain Control 0-18 dB
Switchable FM trap
+12 dB gain on 2-Way Bi-pass
Winegard’s new HDA series of Distribution Amplifiers was
designed to meet the market demand for a heavy duty,
quality built, cost effective solution for the amplification and
distribution of analog/digital broadcast signals from Off-Air
and cable TV stations. Both the HDA-100 & HDA-200 are
housed in an industrial grade, weather resistant enclosure.
Each unit has an RF input, amplified RF output, and DC
power insertion jack. Each amplifier also provides a 5-42
MHz 2-way bi-pass.
The Winegard HDA-100 is a single RF input, 15dB gain,
single RF output, with a 5-42 MHz 2-way bi-pass at -2 dB
loss.
The HDA-200 has a single RF input, 24 dB gain, single RF
output, with a 5-42 MHz 2-way bi-pass at +12 dB gain. The
HDA-200 has 0-18 dB gain control and 20 dB “switchable”
FM trap to eliminate those offending FM radio stations.
These features, when combined with the 12 dB of amplified
gain for the 2 way 5-42 MHz return path make the HDA-
200 a superior solution for the “Techno” savvy consumer.
See reverse side for typical power installations.
HDA-100 SPECIFICATIONS
HDA-100
Bandpass Forward ...............................54-1000 MHz
Bandpass Reverse ...............................5-42 MHz
Max Output per Channel (80 ch CATV) .....+25 dBmV (Note 1)*
Max Output per Channel (16 ch off-air) ......+40 dBmV (Note 2)**
Max Input per Channel (80 ch CATV) ........+10 dBmV (Note 1)*
Max Input per Channel (16 ch off-air) .........+25 dBmV (Note 2)**
Max Input Reverse Amp.......................n/a
Gain .......................................................15 dB
Gain Control..........................................n/a
Reverse Gain ........................................-2 dB
Noise Figure..........................................3 dB
FM Trap.................................................n/a
Operating Temp....................................-30° to 140° F
Power Supply Voltage ..........................12VDC - 200 mA
Housing Dimensions.............................4.90” W x 3.92” H x 1.5” D
Weight ...................................................0.6 lbs.
HDA-200 SPECIFICATIONS
HDA-200
Bandpass Forward ............................. 54-1000 MHz
Bandpass Reverse ............................. 5-42 MHz
Max Output per Channel (80 ch CATV) ... +25 dBmV (Note 1)*
Max Output per Channel (16 ch off-air) .... +40 dBmV (Note 2)**
Max Input per Channel (80 ch CATV) ...... +8 dBmV (Note 1)*
Max Input per Channel (16 ch off-air) ....... +23 dBmV (Note 2)**
Max Input Reverse Amp.......................+23 dBmV (at 1dB comp)
Gain ..................................................... 24 dB
Gain Control........................................ 0-18 dB
Reverse Gain ...................................... +12 dB
Noise Figure........................................ 4.5 dB (at max gain)
FM Trap............................................... -20 dB (95-108 MHz)
Operating Temp.................................. -30° to 140° F
Power Supply Voltage ........................ 12VDC - 200 mA
Housing Dimensions........................... 4.90” W x 3.92” H x 1.5” D
Weight ................................................. 0.6 lbs.
*Note (1) at -62dB ctb, -56dB cso
**Note (2) at -46dB cross modulation
Power
Jack
RF
Input
RF
Output
Power
Jack
RF
Input
RF
Output