Filter
Top Products
FRM 451G ©2007 Williams Sound Corp
WIR RX14-2 Receiver: 2.3 MHz or 2.8 MHz
Instructions For Use & Care
SAFETY INFORMATION
Hearing Safety:
This product is designed to amplify
sounds to a high volume level which
could potentially cause hearing dam-
age if used improperly. To protect your
hearing and the hearing of others:
1. Make sure the volume is turned
down before putting on the ear-
phone or headphone before adjust-
ing the volume to a comfortable
level.
2. Set the volume level at the mini-
mum setting that you need to hear.
3. Do not allow children or other
unauthorized persons to have access
to this product.
BATTERY SAFETY & DISPOSAL
Do not attempt to recharge dispos-
able batteries, which may explode,
release dangerous chemicals, cause
burns, or other serious harm to the
user or product.
PACEMAKER SAFETY
1. Before using this product with a pace-
maker or other medical device, con-
sult your physician or the manufactur-
er of your pacemaker or other medical
device.
2. If you have a pacemaker or other med-
ical device, make sure that you are using
this product in accordance with safety
guidelines established by your physician
or the pacemaker manufacturer.
CAUTION!
CAUTION!
CAUTION!
2
RECYCLING INSTRUCTIONS
Help Williams Sound protect the environment! Please take the time to dispose of
your equipment properly.
Product Recycling:
Please do NOT dispose of your Williams Sound equipment in the household trash.
Please take the equipment to a electronics recycling center; OR, return the product
to the factory for proper disposal.
Battery Recycling:
Please do NOT dispose of used batteries in the household trash. Please take the
batteries to a retail or community collection point for recycling.
5/10/06
APPROVALS
This product meets approval standards established for:
3
O
PERATING
I
NSTRUCTIONS
1. Turn the receiver’s Power Switch to ON.
2. Place the headset on your head and adjust the headband size by pulling or pushing
on each earpiece.
3. Locate and adjust the individual volume controls for a comfortable listening level.
4. Choose between 2.3 MHz or 2.8 MHz operation by pressing the frequency selector
button on the left earphone. NOTE: Be sure the infrared transmitter being used is
transmitting on 2.3 MHz or 2.8 MHz!
I
MPORTANT
The infrared receiver “eye” is located directly above the battery compartment (see
illustration). Do not cover it up or you will lose reception.
Note: To maximize battery life, turn the receiver OFF when it’s not in use.
RX14-2 Headset Receiver
FRONT VIEW
RoHS
WEEE