Whirlpool GC900QPL Trash Compactor User Manual


 
With Trim Kit Without Trim Kit
Compactor
®
PRODUCT MODEL NUMBERS OVERALL DIMENSIONS
CABINET OPENING DIMENSIONS
CUSTOM PANELS
CLEARANCE DIMENSIONS
GC900QPK
GC900QPL
GC900QPP
GX900QPL
GX900QPP
TC800SPK
TU800SPK
TU800SPP
Electrical: 115-volt, 60-Hz, AC-only, 15- or
20-amp. grounded circuit is required. A time-delay
fuse or circuit breaker and separate circuit is
recommended.
18" min.
(45.7 cm)
24" min.
(61 cm)
A
15 min.
(38.7 cm)
34 " min.
(87 cm)
3"
(7.6 cm)
"
A
B
34
1
8"
(86.7 cm)
24"
(61 cm)
15"
(38.1 cm)
23
¹³⁄₁₆"
(
60.5 cm
)
14
⁵⁄₈"
(
37.2 cm
)
23
¹³⁄₁₆"
(
60.5 cm
)
15"
(
38.1 cm
)
25"
(
63.5 cm
)
15"
(
38.1 cm
)
A. Raised panel or decorative trim
B. Outer section of panel
23
¹³⁄₁₆"
(
60.5 cm
)
1¹⁄₄"
(
32 mm
)
14⁵⁄₈"
(
37.2 cm
)
⁷⁄₃₂"
(
5.6 mm
)
⁵⁄₁₆"
⁵⁄₁₆"
(
8 mm
)
both sides
A
B
(
8 mm
)
A. Grounded electrical outlet
must be a minimum of 3 in.
(7.6 cm) away from
surrounding cabinets or
nearby walls as shown. It
can be placed either to the
left or the right side of the
product.
Panel should be 1/2 in.
(13 mm) min. thickness
A. Leave 6 in. (15.2 cm) of clearance
space to the right side of the
compactor in order to remove the
compactor bags.
B. Leave 23 in. (58.4 cm) of clearance
in front of the compactor in order to
fully open or remove the compactor
drawer.
Flat panel Raised panel Models with handles Models without handles
Panel should be 1/2 to 5/8 in.
(13 to 16 mm) thick. NOTE: A
thicker panel may need rounded
front corners and a cutout for
access to the handle.
A 7/32 in. (5.6 mm) thick panel
is required. This is the same
thickness as a standard 1/4 in.
plywood or paneling.
The outer section of panel must be 7/32 in.
(5.6 mm) thick to fit into trim. Design raised
panel sections using dimensions shown above.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. 9871676 Rev. C
11-16-04