Filter
Top Products
GB GB
11
3 Operating elements
Transmitter (A)
1 Power-on lamp
2 Battery pack charge indicator
3 Frequency selector switch
4 Audio input socket
5 Low-voltage socket (AC adapter connection)
6 Battery pack charge socket
Headphones (B)
7 On/Off switch
8 Volume control
9 Tuning knob
10 Power-on lamp
11 Battery pack charge socket
12 Battery pack compartment
3.1 Description of operating elements
3.1.1 Transmitter (A)
1 Power-on lamp
A red lamp tells you when the appliance is ready to transmit. This lamp comes on
only when the audio source emits a signal.
2 Battery pack charge indicator
This lamp lights green when the battery pack charge lead (H) is connected to the
battery pack charge socket (B11) on the headphones and on the transmitter (A6).
3 Frequency selector switch
Using this switch you can alter the transmission frequency in order to prevent over
lapping with other transmitters (channel 1, 2 or 3).
4 Audio input socket
The transmitter can be connected to the sound source (e.g. CD player, cassette
player, television, etc.) using the audio cable (E).
5 Low voltage socket
Connect the AC adapter (C) here for the transmitter's power supply.
6 Battery pack charge socket
Using this socket and the charge lead you can recharge the battery packs of the
headphones without having to remove them from the battery pack compartment.
3.1.2 Headphones (B) with integrated receiver
7 On/Off switch
Slide the switch to the "ON" position to switch on and to the "OFF" position to switch off.
8 Volume control
You can adjust the volume of your headphones individually.
Please note that subjecting your ears to high-volume sound over long periods can lead to
permanent hearing damage. You can tell when the volume is too loud by distinct sound
distortion or the high sound pressure of the music reproduction. This does not make for
pleasant listening! Protect your hearing - Vivanco headphones sound particularly good,
even at low volumes.
9 Tuning knob
Use the tuning knob to set the headphones to the channel you have selected (A3)
(see section 4.2).
10
Instruction manual for the FMH 6050
1 Introduction
You have made an excellent choice ...
... by deciding in favour of an innovative technology which provides you with unique
benefits. Take a few minutes to read this instruction manual carefully. It will help you to
understand and master the different functions.
1.1 Product benefits
The FMH 6050 enables you to transmit stereo sound signals from your hi-fi system,
your television or other audio source cordlessly. As the radio waves in question have a
frequency of approx. 863 MHz, they can be received within a radius of up to 100 metres,
and also through walls and ceilings. However, the actual range depends on surrounding
conditions (e.g. location of transmitter, type of building or atmospheric conditions). Using
the receiver integrated in the headphones, you can move around freely both indoors and
outdoors.
1.2 Important information
Please read these operating instructions carefully and keep them in a safe place.
ᮣ
Do not use the devices in water or rain.
ᮣ
The AC adaptors are designed for these devices only. Do not use the supplied AC
adaptors with other devices.
ᮣ
Avoid exposure to extreme heat or strong light.
ᮣ
Do not open the housings or the AC adaptors (danger of electric shock!).
ᮣ
Check whether the local mains voltage corresponds to the voltage indicated on the
AC adaptor.
ᮣ
Avoid touching the battery or charging contacts. Do not touch the contacts with
metal objects.
ᮣ
Do not cover the devices (e.g. with a towel, sheet, etc.)
ᮣ
Clean the devices using a moist cloth and never use aggressive cleaning agents.
ᮣ
Constant use at high volumes impairs your hearing and may cause permanent damage.
ᮣ
Do not dispose of this product with the domestic waste; take it to your local
electronic waste recycling depot.
2 Components included in the set
First check whether your set is complete. Should any parts be missing, please contact
your dealer.
A 1 x transmitter
B 1 x headphones with integrated receiver
C 1 x 12 V AC adapter
D 2 x rechargeable battery packs (AAA,1.2V)
E 1 x audio lead
F 1 x Y-connection lead
G 1 x adapter from 3.5 mm to 6.35 mm jack plug
H 1 x battery pack charge lead