Viking VGBQ Gas Grill User Manual


 
OUTDOOR—COOKING
53”W. Ultra-Premium T-Series/E-Series Gas Grill
PLANNING AND DESIGN GUIDE
VIKINGRA NGE.COM 1-88 8-VIKI NG1
All models include
Brass Trim Option (BR)—nameplate,
handle/brackets, and knob bezels.
Brass components have a durable
protective coating for maintenance-
free normal use.
FINISH DETAILS FOR ALL MODELS
Stainless Steel (SS)
o Porcelain-coated cooking grids (and
“V” grates on the 412 model’s side
burners), and black knobs.
Standard Features & Accessories
Model Options
*T-Series & E-Series models look the same, with the exception of the canopy light switch in the upper right corner of the E-Series control panel.
(See photo of 30”W. E-Series grill for example.)
ORDERING INSTRUCTIONS
You must specify fuel type (“N” or “L”) following model number (VGBQ5304RT1NSS). If ordering optional brass trim, specify code at end
(VGBQ5304RT1NSSBR).
RELEASED 8/5/08
©2008 VRC—INFORMATION SUBJECT TO CHANGE
VGBQ530-4RE1*
T-Series/E-Series
Four-Burner All-Grill
VGBQ532-3RE1*
T-Series/E-Series
Three-Burner Grill
w/Side Burners
VGIQ530-4RT/E1*
T-Series/E-Series
Four-Burner All-Grill
(inc. TruSear™ Burner)
VGIQ532-3RT/E1*
T-Series/E-Series
Three-Burner Grill
w/Side Burners
(inc. TruSear™ Burner)
Commercial styling and construction
o
Built from thick sheets of rugged,
heavy-duty stainless steel
o
Double wall construction insulates
hood to help keep heat inside and
provides for a cooler sidewall
o
Hood is slightly slanted to prevent
water from accumulating on top of
grill, and provides a sleek style that is
synonymous with the Viking name
o
No exposed rotisserie slot to take
away from strength of sidewall or
allow heat to escape
o
All models can be built into any type
of enclosure without the need of an
insulated jacket – a Viking exclusive
o
Stainless steel landing ledge with
solid, welded, seamless finish
o
No assembly required
Canopy has been designed for seamless
fit and finish
Knobs are cast metal for durability and
all bezels match indoor range line
All outdoor control panel graphics are
permanently laser-etched at the factory
Extra-deep sealed burner box keeps
heat contained in burner area, allowing
easier temperature maintenance
Stainless steel flavor-generator plates
catch drippings, generate smoke,
minimize flare-ups, and allow for better
heat control
o
Perforated design allows heat to
spread quickly and evenly across
entire surface
o
Burner flames are visible through
perforations, allowing user to visually
monitor heat output and adjust to
desired level
Chrome-plated warming rack –
reinforced by heavy-duty rack supports –
can easily be adjusted to three different
positions, allowing use of additional
accessory racks
Rotisseries standard on all Ultra-
Premium models; rotisserie system
consists of a 15,000 BTU Gourmet-
Glo™ infrared rear burner, heavy-duty
rotisserie motor, stainless steel 1/2”
rotisserie rods, and two rotisserie forks
o Infrared burner is a reliable,
electronically ignited one-piece
design
o Rotisserie rod is mounted on a ball-
bearing rod support that provides
smooth rotating action; rod is fully
enclosed within grill, a Viking
exclusive feature
o Rotisserie motor assembly is
supported by a rigid mount and is
easily attached and removed from
the grill for hassle-free cooking and
storage
o No counter balance required due to
heavy-duty rotisserie system
Removable smoker box
accommodates wood chips or large
wood chunks
o
Hinged design allows easy operation
when adding smoker chips
o
12,500 BTU burner underneath can
be adjusted for maximum smoking
performance
o
Smoker box can be replaced with
grilling grate for use of entire grill
surface
Numerical thermometer gives precise
temperatures for grilling, smoking, and
warming
Easy maintenance and cleanup
o
Extra heavy-duty cooking grids are
porcelain-coated topreventfood from
easily sticking; virtual non-stick surface
creates optimal cooking areas, while
also creating an easy-to-clean surface
o
Burners are equipped with stainless
steel drip guards to combat burner
clog and aid grease management by
channeling liquids to the drip tray,
assisting in flare-up control
o Grease Control™ system consists of
full-width removable stainless steel
drip tray, and individual removable
trays within main tray
Exclusive “trays within a tray”
design channels liquids to the
precise drip tray location,
providing easy cleanup because
liquids are contained
Stainless steel ball-bearing rollers
provide smooth opening of drip
tray, while roller stops prevent tray
from falling out