Filter
Top Products
PREPARATION
17
Before Operation (Continued)
Initial Setup
You can set your own Personal Preferences on the
DVD/CD Receiver
.
General and Operation
11
Press SETUP.
The Setup menu appears.
22
Use
33
/
44
to select the menu option.
The screen will show the current setting for the
selected menu option, as well as alternate
setting(s).
33
While the menu option is selected, press
22
, then
33
/
44
to select the desired setting.
44
Press ENTER to confirm your selection.
Some menu option require additional steps.
55
Press SETUP, RETURN, or PLAY to remove the
Setup menu.
Language
Disc Language
Select a language for the disc’s Menu, Audio, and
Subtitle.
Original : The original language set for the disc is selected.
Other :To select another language, use the number buttons to
enter the corresponding 4-digit number according to the lan-
guage code list on page 30. If you enter the wrong language
code, press CLEAR.
Menu Language
Select a language for the Setup menu. This is the menu
you see when you press SETUP.
Picture
TV Aspect
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a conventional TV set is
connected. The video material formatted in the Pan &
Scan style is played back in that style (Both sides of the
picture are cut off).
16:9 Wide: Select when a 16:9 wide TV is connected.
Progressive Scan
Progressive Scan Video provides the highest quality pic-
tures with less flickering.
If you are using the COMPONENT VIDEO OUT jacks,
but are connecting the
DVD/CD player
to a standard
(analog) television, set Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Notes
Progressive Scan will not be displayed in the Setup
menu when the rear switch (VIDEO OUT SELEC-
TOR) is set at SCART position.
Once the setting for progressive scan output is
entered, an image will only be visible on a progres-
sive scan compatible TV or monitor. If you set
Progressive Scan to On in error, you must reset the
unit.
1) Remove any disc from the unit and close the disc
tray. See that “NO DISC” is displayed on the dis-
playwindow.
2) Press STOP and hold it for five seconds before
releasing it. The video output will be restored to
the standard setting and a picture will once again
be visible on a conventional analog TV or monitor.
DVD
DVD
DVD
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
Disc Audio
English
Spanish
French
German
Italian
Dutch
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Disc Audio
4:3
4:3
16:9
Letterbox
Panscan
Wide
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Disc Audio
Original
German
Dutch
Italian
Hungarian
Polish
English
French
Spanish
Other — — — —
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Disc Audio
Off
On
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Disc Audio
Original
German
Dutch
Italian
Hungarian
Polish
English
French
Spanish
Other — — — —