Technicolor - Thomson RT2350BK Stereo Receiver User Manual


 
Operating your Receiver
Operating the Radio
The receiver has a built-in tuner that allows for
AM/FM radio function.
Manual tuning
1. Connect the FM and AM antenna accordingly (see
"Connecting the Antenna" on page 5 section for
details)
2. Press ON/STANDBY to switch on the receiver.
3. Press SOURCE keys to enter TUNER mode.
4- To select band, press the FM/AM button to toggle
between AM/FM mode.
5- Tune the stations by pressing TUNING UP or
DOWN repeatedly until the desired station is found.
Alternatively, you can press and hold TUNING UP or
DOWN for about one second to activate the
automatic SEARCH function. In this mode the receiver
will automatically tune frequencies until it finds a
station
Select sound effect if needed by pressing Preset EQ or
DSP sound (see "Advance sound section" for details).
Selecting Mono or Stereo Sound
Press ST/MONO on the main unit or the DIGITAL
button on the remote control to toggle between
mono and stereo sound in FM tuner mode (when
available).
TUNING ME
M
SOURCE
SOURCE
FM/AM
NOTE
1. If there is interference, modify the location
of the antenna until the optimal sound is heard.
TV and other electronic devices could be the
cause of interferences so try to position the
antenna away from them.
2. Weak signal can affect the "auto Search
function". Adjust the antenna for better recep-
tion for more efficient search.
16
MUTE
ON/STANDBY
MEMORY
R
CE
R
CE
FM/AM TUNING
TUNI
N
FM/AM
SOURCE
SOURCE
B
A
V
S
ETUP TEST TONE EQ DIGITAL INPUT
ST / MONO
SURR MODE
DSP MODE