Filter
Top Products
20
Advanced Sound Control
Dolby 3 Stereo
The 3 Stereo mode will redirect the Surround signals to the
front left and right speakers when only the front and
center speakers are used.
.
Stereo
The Stereo mode uses the two main channel outputs
from the front speakers. Use this mode if you have
connected the front speakers only.
DSP (Digital Sound Processor)
These digital sound effects resemble sounds in a real
environment such as (DISCO / STADIUM / THEATER / JAZZ
CLUB / ARENA). DSP automatically converts analog
audio signals to digital ones which enables you to adjust
the sound without degrading the sound quality.
Different modes will give you different feels of size and
types of listening environment.
Night Mode
By using Dynamic Range Control technology, you can
enjoy enhanced Dolby Digital sound quality at night
without interrupting your roommates or neighbors.
Night Mode will compress the difference between
normal voices and sounds such as explosions, while still
enjoying a Dolby Digital enable component (DVD, SAT).
Night Mode can be activated by pressing the NIGHT
button on the remote control. DRC OFF (Default)
appears on the display. While DRC OFF (Default) is still
on the display, continue to press the NIGHT button to
toggle and select the desired night mode. There are
three modes (DRC OFF, SOFT, ON) for you to choose the
extents of compression.
Dynamic Bass Amplified System (dBas)
With “Dynamic Bass Amplified System” (dBas), the
discrete amplifier is located in the receiver so the
subwoofer keeps the power needed to reproduce
powerful effects.
4 settings are available: SOFT, BALANCED, STRONG and
POWERFUL.
Press the SUBWOOFER button to toggle the subwoofer
(dBas) effects level according to your needs.
SOURCESUBWOOFER SURR
O
Front Left Speaker
Front Right Speaker
Center Speaker
Listening
Zone
NOTE
Night mode is available only with Dolby Digital
playback.
DPL680 EN 4/8/04 4:01 PM Page 24