Filter
Top Products
Operating your Receiver
Operating the Radio
The receiver has a built-in tuner that allows for
AM/FM radio function.
Manual tuning
1. Connect the FM and AM antenna accordingly (see
"Connecting the Antenna" on page 5 section for
details)
2. Press ON/ECO to switch on the receiver.
3. Press SOURCE keys to enter TUNER mode.
4- To select band, press the BAND button to toggle
between AM/FM mode.
5- Tune the stations by pressing TUNING UP or
DOWN repeatedly until the desired station is found.
Alternatively, you can press and hold TUNING UP or
DOWN for about one second to activate the
automatic SEARCH function. In this mode the receiver
will automatically tune frequencies until it finds a
station
Select sound effect if needed by pressing Preset EQ or
DSP sound (see "Advance sound section" for details)
TUNING MEMORYBAND
SOURCE
SOURCE
NOTE
1. If there is interference, modify the location
of the antenna until the optimal sound is heard.
TV and other electronic devices could be the
cause of interferences so try to position the
antenna away from them.
2. Weak signal can affect the "auto Search
function". Adjust the antenna for better recep-
tion for more efficient search.
16
MUTE
ON/ECO
PHONES
SOUR
C
DIGITAL
SOUR
C
TUNING MEMORYFM/AM
E
E
TUNING MEMORYFM/AM
SOURCE
L
SOURCE
DPL560-EN 4/11/02 5:28 PM Page 20