Filter
Top Products
EN
Radio
8
Selecting Tuner Band
• Press TUNER/BAND•APP on the main unit or
TUNER on the remote control to select radio
mode.
• Select a radio band by pressing TUNER/
BAND•APP on the main unit or BAND/APP
on the remote control:
FM – Frequency Modulation (87.5 – 108 MHz)
MW – Medium Wave (522 – 1620 KHz)
Searching for a Station
• Press TUNING - or + on the main unit or SKIP
BACKWARD or SKIP FORWARD on
the remote control to search for a radio
station.
•To search automatically, press and hold
TUNING - or + on the main unit or SKIP
BACKWARD or SKIP FORWARD on
the remote control for 1 second.
Presetting a Station
1. Press TUNER/BAND•APP on the main unit or
BAND•APP on the remote control to select
band.
2. Press TUNING - or + on the main unit or SKIP
BACKWARD or SKIP FORWARD on
the remote control to select station to be
stored.
3. Press PROG•SET•CLEAR to enter program
mode.
4. Press PRESET - or + to select memory location
(up to 30 memory locations). When you are
selecting the preset location, the preset station
number is flashing.
5. Press PROG•SET•CLEAR to confirm the
setting.
Auto Preset Programming
Press and hold TUNER/BAND•APP on the main
unit or BAND•APP on the remote control to scan
stations in selected band. A maximum of 30
stations can be stored. Beware of your preset
channels being erased accidentally because the
scanning and storing process is automatic upon
pressing the button.
Press any button to stop scanning.
Listening to the Preset Station
1. Press TUNER/BAND•APP.
2. Press PRESET + / - repeatedly to locate your
desired memory location.
Suppressing Stereo Signal
Press STEREO/MONO on the main unit or ST•MO
on the remote control to toggle between FM
mono and stereo for FM broadcast.
If FM stereo reception is weak, select mono sound
to reduce noise.
Tips:Tips:
Tips:Tips:
Tips:
A maximum of 30 stations can be stored.
CS84 EN new 1/9/04, 2:13 PM11