Filter
Top Products
7 – Other functions
TASCAM CD-D1x4 17
Copy-protection
The CD-D1x4 allows copy-protection to be applied
to audio discs produced using the unit.
There are three settings:
•
1GENERATION (single-generation copying),
where one digital copy (“child”) can be made from
the recorded disc, but no digital copies (“grandchil-
dren”) can be made from the child.
•
FREE (may be freely copied), where no copy-pro-
tection is applied to the recorded disc.
•
PROHIBIT (copy prohibited) which prevents
any digital copies being made from the recorded
disc
1 Press the
MODE button until the display
shows:
2 Press
ENTER, and then press MODE until the
screen shows:
3 Press
ENTER, and then use the MODE key to
choose between
1GENERATION, FREE
and
PROHIBIT as explained above.
4 Press
ENTER to confirm the setting.
Audio playback
Since it is impossible to make a bit-by-bit compari-
son of audio CDs, this function is provided for you to
“audition” a CD copy, using a pair of headphones
connected to the headphone jack of the
MASTER or
one of the slave drives.
Any standard headphones with a 3.5 mm stereo jack
may be used. The volume is adjusted using the
drive’s volume control (turn to the right to increase
the volume, and to the left to decrease the volume).
1 Press the
MODE key until the display shows
the following:
2 Press
ENTER:
3 Press ENTER to select the MASTER drive, or
keep pressing
MODE until the display shows
the number of the slave drive you want to
use, and then press
ENTER.
4 The disc tray of the selected drive opens
automatically, and you should then insert the
disc and close the tray.
5 Press
ENTER to start playback. While the
disc is being played back:
• Use the
ESCAPE key to stop playback
• Press and hold the
MODE key to rewind
through a track (playback is muted)
• Press and release the
MODE key to go back a
track
• Press and hold the
ENTER key to fast for-
ward through a track (playback is muted)
• Press and release the
ENTER key to go for-
ward a track
The display shows the current track and the
number of tracks on the disc, as well as the
elapsed time on the current track:
While playback is stopped:
• Use the
ESCAPE key to go up one level in the
menu system.
• Press and release the
MODE key to move
backward a track
• Press and release the
ENTER key to go for-
ward a track
When playback is stopped, the display shows
the total number of tracks on the disc, as well
as the total recorded time of the disc:
NOTE
If the copied CD contains audio errors, you will be able
to hear them, but no message will appear on the dis-
play. If a copied CD contains audible errors, you may
want to consider re-recording at a lower speed, which
will almost certainly reduce the error rate.
SETUP?
(MODE CHANGE)
>COPY ID?
(1GENERATION)
PLAY AUDIO?
SELECT DRIVE
MASTER?
TRACK 02/12
PLAY 03:13
TRACK 12/12
TIME 54:23