Filter
Top Products
2003 SONY MOBILE
PRODUCT GUIDE
Design and Specifications subject to change without notice.
1600W max power
500W x 1 RMS into 4W, 20Hz - 300Hz @ 0.2% THD
900W x 1 RMS into 2W, 20Hz - 300Hz @ 0.6% THD
Class D
Variable 50 - 300Hz 12dB/oct Low Pass Filter
40Hz EQ Boost
RCA & Speaker Level Inputs
XM-D1000P5
Monaural Power Amplifier
Other Specifications
Circuit system Class D Technology
Pulse power supply
Inputs RCA pin jacks
High level input connector
Outputs Speaker terminals
Through out pin jacks
Suitable speaker impedance 2 8W
Maximum outputs 1,000 W (at 4W)
1,600 W (at 2W)
Rated outputs (supply voltage at 14.4 V)
500 W (20 300 Hz, 0.2% THD, at 4W)
900 W (20 300 Hz, 0.6% THD, at 2W)
Frequency response 5 300 Hz ( +0.5 dB, -3 dB)
Harmonic distortion 0.06% or less (at 100 Hz, 4W)
Input level adjustment range 0.3 6.0 V (RCA pin jacks)
1.2 12.0 V (High level input)
Low-pass filter 50 300 Hz, 12 dB/oct
Low boost 0 10 dB (40 Hz)
Power requirements 12 V DC car battery (negative ground)
Power supply voltage 10.5 - 16 V
Current drain at rated output : 90 A (2W)
Remote input : 2 mA
Dimensions Approx. 347 × 57 × 339 mm (w/h/d)
(13 3/4 × 2 1/4 × 13 3/8 in.) (w/h/d) not incl.
projecting parts and controls
Mass Approx. 3.8 kg (8 lb. 6 oz.) not incl. accessories
Supplied accessories Mounting screws (5)
High level input cord (1)
Protection cap (1)
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
500 watts minimum continuous average power into 4 ohms, 20 Hz to
300 Hz with no more than 0.2% total harmonic distortion per Car
Audio Ad Hoc Committee standards.