Sony XM-5150GSX Stereo Amplifier User Manual


 
Design and Specifications subject to change without notice.
XM-5150GSX
5/3 Channel Amplifier
880W max power
40W x 4 + 150W x 1 into 4W, 20Hz-20kHz, @ 0.04% THD
60W x 4 + 180W x 1 into 2W, 20Hz-20kHz, @ 0.1% THD
120W x 2 + 150W x 1 into 4W
 MOSFET Outputs
 MOSFET Power Supply
 Input Channel Selector (Front/Front + Rear)
 Variable F+R 50-300Hz Hi Pass, Sub 50-300Hz
Low Pass Filter
 F+R RCA Inputs
Indicates step-up
2002 SONY MOBILE
PRODUCT GUIDE
Other Specifications
Circuit system OTL (output transformerless) circuit
Pulse power supply
Inputs RCA pin jacks
Outputs Speaker terminals
Speaker impedance 2  8 W (stereo) 4  8 W (when used as a bridging amplifier)
Maximum outputs 80 watts × 4 + 300 watts × 1 (at 4 W)
Rated outputs (supply voltage at 14.4 V)
5 Speakers: 40 watts × 4 (50 Hz  20 kHz, 0.04% THD, at 4 W)
+ 150 watts × 1 (20  300 Hz, 0.04% THD, at 4 W)
60 watts × 4 (50 Hz  20 kHz, 0.1% THD, at 2 W) + 180 watts × 1
(20  300 Hz, 0.1% THD, at 2 W)
3 Speakers: 120 watts × 2 (50 Hz  20 kHz, 0.1% THD, at 4 W)
+ 150 watts × 1 (20  300 Hz, 0.04% THD, at 4 W)
Frequency response 5 Hz  50 kHz ( +0 dB, -3 dB)
Harmonic distortion 0.005% or less (at 1 kHz, 4 W)
Input level adjustment range 0.2  6.0 V (RCA pin jacks)
High-pass filter 50  300 Hz, 12 dB/oct
Low-pass filter 50  300 Hz, 12 dB/oct
Power requirements 12 V DC car battery (negative ground)
Power supply voltage 10.5  16 V
Current drain at rated output: 42 A
Remote input: 1.0 mA
Dimensions Approx. 358 × 50 × 264 mm (w/h/d) (14 1/8 × 2 × 10 1/2 in.) not incl.
projecting parts and controls
Mass Approx. 3.5 kg (7 lb. 11 oz.) not incl. accessories
Supplied accessories Mounting screws (4)
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
40 watts/150 watts per channel minimum continuous average power into
4 ohms, 5 channels driven from 50 Hz to 20 kHz/20 Hz to 300 Hz
(subwoofer) with no more than 0.04% total harmonic distortion per Car
Audio Ad Hoc Committee Standards.