Sony SAVA-500 Speaker System User Manual


 
To mute the sound
Press MUTING on the remote.
To restore the sound, press MASTER VOL + (or
MUTING on the remote again).
Notes
Some videos and laser discs may support Dolby Pro Logic
Surround sound even if it is not indicated on the package
The surround modes do not opel-ate when the 5.1-channel
input is selected
Adjusting the Surround Sound
This speaker system is factory set to provide balanced
surround sound without the need for adjustment. You
can, however, adjust the volume of each speaker and
the delay time to suit the conditions of your living
room or your individual tastes.
--REAR +/-
--T.TONE
---DELAY
Adjusting the speaker volume
Tile test tone feature lets you adjust the volume of the
sound coming from each speaker to the same level, so
that the surround sound will be even and natural.
Make the following adjustments from your listening
position.
1
2
Select the surround mode you want to adjust.
Press T.TONE on the remote.
A test tone is output from each speaker in the
following order:
When you select PRO LOGIC or C.STUDIO
r=_ Front(Left) _ Center _ Front (Right)
/
Rear I
When you select HALL, STADIUM or GAME
i I Front
Rear i J
When you select 5.1 CH IN
Front (Left) -_ Center --_ Front (Right)_
i Rear (Left) 4- Rear (Right) I /
(Continued)
11