Filter
Top Products
22
Troubleshooting (continued)
The CD does not play.
• Make sure that the CD compartment is
closed.
• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD
compartment open for about an hour to dry
moisture condensation.
• Make sure “CD” appears in the display.
The sound drops out.
• Reduce the volume.
• Clean the CD, or replace it if the CD is badly
damaged.
• Place the player in a location free from
vibration.
• The sound may drop out or noise may be
heard when using poor quality CD-Rs/CD-
RWs or if there is a problem with the
recording device or application software.
“Not MP3” is displayed.
• You are trying to play a file that is not an
MP3 file but has extension “mp3”. (page 25)
“Not MP3 (Layer-1, 2)” is displayed.
• You are trying to play an MPEG1 Audio
Layer-1 or 2 file. You can only play MP3
(MPEG 1 Audio Layer-3) files on this player.
(page 25)
Radio
The audio is weak or has poor quality.
• Replace all the batteries with new ones if
they are weak.
• Move the player away from the TV.
The picture of your TV becomes unstable.
• If you are listening to an FM program near
the TV with an indoor antenna, move the
player away from the TV.
After trying the above remedies, if you still have
problems, unplug the AC power adaptor and
remove all the batteries. After all the indications in
the display disappear, plug the AC power adaptor
and insert the batteries again. If the problem
persists, please consult your nearest Sony dealer.