Filter
Top Products
Editing Recorded MDs
33
GB
3 Enter a character using letter/number
buttons.
If you have selected upper cases or
lower cases
1 Press the corresponding letter/number
button repeatedly until the character to
be entered flashes.
Or, press the button once and press
./> repeatedly.
To select symbols, press .
repeatedly while “A” is flashing.
2 Press M.
The flashing character is entered and
lights continuously and the cursor shifts
to the right.
If you have selected numbers
Press the corresponding number button.
The number is entered and the cursor shifts
to the right.
4 Repeat steps 2 and 3 to enter the rest of
the name.
To change a character
Press m/M repeatedly until the
character to be changed flashes, press
CLEAR to erase the character, then repeat
steps 2 and 3.
5 Press YES.
The whole name appears in the display,
followed by “Complete!.”
Renaming a track or an MD
1 Press NAME EDIT/SELECT on the
remote depending on what you want to
rename:
A track or disc name appears in the display.
2 Press CLEAR until the selected name is
erased completely.
3 Do steps 4 to 7 of “Naming a track or an
MD using the controls on the deck” on
page 32 or steps 2 to 4 of “Naming a
track or an MD using the remote” on
page 32.
4 Press YES.
The whole name appears in the display,
followed by “Complete!.”
Erasing a track or disc name
Use this function to erase the name of a track or
disc.
1 While the deck is stopped, playing,
recording, or paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn AMS (or press ./>
repeatedly) until “Nm Erase?” appears,
then press AMS or YES.
3 Turn AMS (or press ./>
repeatedly) until the number of the track
(when erasing the track name) or “Disc”
(when erasing the disc name) flashes,
then press AMS or YES.
“Complete!” appears.
To rename Press while
A track The track number is displayed
The MD The deck is stopped with total
number of tracks (or groups when
the Group function is on)
displayed