Filter
Top Products
Noise Canceling
Headphones
Operating Instructions
Mode d’emploi
Manual de instrucciones
© 2014 Sony Corporation Printed in Malaysia
4-540-896-11(2)
MDR-ZX110NC
2
3
4
How to use/Mode d’utilisation/Modo de uso
Installing a battery/Installation d’une pile/Colocación de la pila
Connecting/Raccordement/Conexión Turning on the power/Mise sous tension/Encendido
After use
Turn off the power of the headphones
Après utilisation
Éteignez le casque
Después del uso
Apague los auriculares
5
Wearing/Port/Colocación
1
Unfolding the headphones/Dépliage du casque/Desplegar los auriculares
Digital music player, etc.
Lecteur musical numérique, etc.
Reproductor de música digital, etc.
Notes on headphones
High volume may affect your
hearing. For traffic safety, do not use
while driving or cycling.
As headphones reduce outside sounds, they may
cause a traffic accident. Also, avoid listening with
your headphones in situations where hearing
must not be impaired, for example, a railroad
crossing, a construction site, etc.
Preventing hearing damage
Avoid using headphones at high volume. Hearing
experts advise against continuous, loud and
extended play. If you experience a ringing in your
ears, reduce the volume or discontinue use.
Note on static electricity
In particularly dry air conditions, noise or sound
skipping may occur, or mild tingling may be felt
on your ears. This is a result of static electricity
accumulated in the body, and not a malfunction
of the headphones.
The effect can be minimized by wearing clothes
made from natural materials.
If you have any questions or problems
concerning the system that are not covered in
this manual, please consult the nearest Sony
dealer.
Troubleshooting
No sound
Check the connection of the headphones and
the equipment.
Check that the connected equipment is turned
on.
Turn up the volume of the connected
equipment.
Clean the plug of the headphones with a soft
dry cloth.
The noise canceling effect is
not sufficient
The noise canceling function is effective in low
frequency ranges such as airplanes, trains, or
offices (near air-conditioning, etc.) and is not
as effective for higher frequencies, such as
human voices.
Turn on the headphones.
Distorted sound
Turn down the volume of the connected
equipment.
Clean the plug of the headphones with a soft
dry cloth.
Power does not turn on
Check if the battery has expired (the POWER
indicator lights off) and the battery is inserted
in the correct orientation. Replace the battery
with a new one or reinsert the battery in the
correct orientation.
No operation works
Set the POWER switch of the headphones to
“OFF”, confirm the connections, and then set
the POWER switch back to “ON”.
Features
95% Ambient Noise Reduction
Noise canceling headphones reduce
unwanted ambient noise and provide a
quieter environment to enhance your listening
experience.
Quick folding style
Original compact folding mechanism for easy
carriage and storage.
Producing balanced, clear and powerful high
quality sound
300 kJ/m
3
Neodymium magnet delivers
powerful sound and equalizer provides
balanced sound from bass to high note.
Able to use as a regular headphones even
when the POWER switch is set to “OFF”.
Long battery life - approx. 80 hours with AAA
alkaline battery.
English Noise Canceling
Headphones
WARNING
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
FOR UNITED STATES CUSTOMERS. NOT
APPLICABLE IN CANADA, INCLUDING IN THE
PROVINCE OF QUEBEC.
POUR LES CONSOMMATEURS AUX ÉTATS-UNIS.
NON APPLICABLE AU CANADA, Y COMPRIS LA
PROVINCE DE QUÉBEC.
The following FCC statement applies only to
the version of this model manufactured for
sale in the USA. Other versions may not comply
with FCC technical regulations.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Notes on use
What is noise canceling?
The noise canceling circuit actually senses
outside noise with built-in microphones and
sends an equal-but-opposite canceling signal to
the headphones.
Notes on the noise canceling
function
Adjust the earpads so that they cover your
ears, otherwise noise canceling will not
function properly.
The noise canceling effect may vary depending
on how you wear the headphones.
Do not cover the microphone of the
headphones with your hands. The noise
canceling function may not work properly.
Microphone
After you turn on the power of the
headphones, you may hear a slight hiss. This
is the operating sound of the noise canceling
function, not a malfunction.
The noise canceling function works for noise
in the low frequency band primarily. Although
noise is reduced, it is not canceled completely.
The noise canceling effect may not be
pronounced in a very quiet environment, or
some noise may be heard.
When you use the headphones in a train or
a car, noise may occur depending on street
conditions.
Mobile phones may cause interference
and noise. Should this occur, locate the
headphones further away from the mobile
phone.
Notes on using on the airplane
Do not use the headphones when use of
electronic equipment is prohibited or when
use of personal headphones for in-flight
entertainment services is prohibited.
Notes on handling
Because the headphones are designed to fit
closely in your ears, forcing them against your
ears may result in eardrum damage. Avoid
using the headphones where they are liable to
be struck by people or other objects, such as
a ball, etc.
Pressing the headphones against your ears
may produce a diaphragm click sound. This is
not a malfunction.
Clean the headphones with a soft dry cloth.
Do not leave the plug dirty otherwise the
sound may be distorted.
Be sure to consult a Sony dealer when the
earpads become dirty or damaged, or when
the headphones require repair work.
Do not leave the headphones in a location
subject to direct sunlight, heat or moisture.
Do not subject the headphones to excessive
shock.
Handle the driver units carefully.
If you feel drowsy or sick while using this
headphones, stop use immediately.
Specifications
General
Type Dynamic, closed
Driver units 30 mm, dome type (CCAW
adopted)
Power handling capacity
40 mW
Impedance 220 Ω at 1 kHz (when the power
is on)
45 Ω at 1 kHz (when the power
is off)
Sensitivity 115 dB/mW (when the power is
on)
110 dB/mW (when the power is
off)
Frequency response
10 Hz – 22,000 Hz
Total Noise Suppression Ratio
1)
Approx. 13 dB
2)
Cable Approx. 1.2 m (47
1
/4 in), OFC Litz
wire
Plug Three-conductor gold plated
L-shaped stereo mini plug
Power source DC 1.5 V, 1 × R03 (size AAA)
battery
Mass Approx. 150 g (5.3 oz) including
battery, not including cable
Battery life
Battery Approx. hours
3)
Sony alkaline battery
LR03 SIZE AAA
80 hours
4)
Sony manganese battery
R03 SIZE AAA
40 hours
4)
Note
The supplied battery was included in the package
during manufacturing (as a convenience to the
user), it is possible that the battery life may be
depleted by the time of purchase. The actual life
of the supplied battery may be shorter than the
standard time described in this manual when
using a fresh battery.
When the battery is low
Replace the battery with a new one when the
POWER indicator blinks or lights off.
Notes
The sound and noise canceling effect may
become intermittent when the battery is low.
The headphones will automatically switch
to passive mode when the battery power
is empty. You might hear the sound
characteristics change in this mode.
Included items
Headphones (1)
Plug adaptor for in-flight use
5)
(1)
Sony R03 (SIZE AAA) battery (1)
Operating Instructions (1)
Warranty card (USA) (1)
Warranty card (Canada) (1)
1)
Under the Sony measurement standard.
2)
Equivalent to approx. 95% reduction of
energy of sound compared with not wearing
headphones.
3)
At 1 kHz, 0.1 mW + 0.1 mW output
4)
Time stated above may vary, depending on the
temperature or conditions of use.
5)
May not be compatible with some in-flight
entertainment services.
Design and specifications are subject to change
without notice.
Tactile dot (on the left)
Point tactile (à gauche)
Punto táctil (a la izquierda)
Do the same for the left side.
Faites de même pour le côté gauche.
Haga lo mismo en el lado izquierdo.
Push
Poussez
Empujar