Filter
Top Products
masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB06OTH_HT-K250_CEL.fm]
26
GB
model name1[HT-K250]
[4-247-255-11(1)]
Use the SET UP menu to set the types of the
speakers.
1 Press MAIN MENU repeatedly to select
SET UP menu.
2 Move the V/v/B/b button up or down
to select the parameter.
3 Move the V/v/B/b button to left or
right to select the setting.
4 Repeat steps 2 and 3 to adjust the other
parameters.
Speaker setup parameters
The initial setting is underlined.
xFront speaker distance ( DIS.)
Initial setting: 3.0 m
Lets you set the distance from your listening
position to the front speakers (A on page 10).
You can adjust from 1.0 meter to 7.0 meters in
0.1 meter steps.
If both front speakers are not placed an equal
distance from your listening position, set the
distance to the closest speaker.
xCenter speaker distance ( DIS.)
Initial setting: 3.0 m
Lets you set the distance from your listening
position to the center speaker. You can enjoy a
higher quality sound effect if you place the
center speaker from a distance equal to the front
speaker distance (A on page 10) to a distance
1.5 meters closer to your listening position (B
on page 10).
xSurround speaker distance
( DIS.)
Initial setting: 3.0 m
Lets you set the distance from your listening
position to the surround speakers. You can enjoy
a higher quality sound effect if you place the
surround speakers from a distance equal to the
front speaker distance (A on page 10) to a
distance 4.5 meters closer to your listening
position (C on page 10).
If both surround speakers are not placed an equal
distance from your listening position, set the
distance to the closest speaker.
xSurround speaker position ( PL.)
Lets you specify the location of your surround
speakers for proper implementation of the
surround effects in the Cinema Studio EX
modes (page 21).
•SIDE
Select if the location of your surround
speakers corresponds to section A.
• BEHIND (BEHD)
Select if the location of your surround
speakers corresponds to section B.
xSurround speaker height ( HGT.)
Lets you specify the height of your surround
speakers for proper implementation of the
surround effects of the Cinema Studio EX
modes (page 21).
•LOW
Select if the height of your surround speakers
corresponds to section A.
•HIGH
Select if the height of your surround speakers
corresponds to section B.
Setting up the speakers
L
R
C
SL
SR
SL
SR
90˚
45˚
20˚
BB
A
A
SL
SR
60˚
30˚
A
B
A
B