Sony DAV-S800 CD Player User Manual


 
68
Position diagram
Height diagram
60
30
CC
DD
REAR
BEHIND [A] (LOW), BEHIND [A]
(HIGH), SIDE [A] (LOW), SIDE [A]
(HIGH), BEHIND [B] (LOW),
BEHIND [B] (HIGH), SIDE [B]
(LOW), SIDE [B] (HIGH): Specify the
position, if the speakers are used with
speaker stands [A] or without the
speaker stands [B], and height to
implement the Digital Cinema
Surround modes in the “Virtual Multi
Dimension” sound field (page 48)
properly.
— NONE: Select this if no rear speaker is
used.
SUBWOOFER
YES
Notes
When you select an item, the sound cuts off for a
moment.
Depending on the settings of other speakers, the
subwoofer may output excessive sound.
Specifying the rear speaker position
and height
If you select anything other than “NONE” in
“REAR,” specify the position and height of
the rear speakers. The default setting is
underlined.
BEHIND [A]
(LOW) or (HIGH)
SIDE [A]
(LOW) or (HIGH)
BEHIND [B]
(LOW) or (HIGH)
90
20
45
AA
BB
Select this if the rear speakers
are located in section B
attached with the speaker
stands [A], and if the height is
in section D, select (LOW) or
in C, select (HIGH).
Select this if the rear speakers
are located in section A
attached with the speaker
stands [A], and if the height is
in section D, select (LOW) or
in C, select (HIGH).
Select this if the rear speakers
are located in section B
without the speaker stands [B],
and if the height is in section
D, select (LOW) or in C,
select (HIGH).
These parameters are not available when “REAR” is
set to “NONE.”
SIDE [B]
(LOW) or (HIGH)
Select this if the rear speakers
are located in section A
without the speaker stands [B],
and if the height is in section
D, select (LOW) or in C,
select (HIGH).